Roof Mounted 3G & 4G MIMO Antenna
£ 99.99
| Type | Price (£) | Shipping (£) | Stock |
|---|---|---|---|
| Product not available! | |||
Please Note: This product has been replaced with the 4G Low Profile Roof Mount Antenna. Please click here for more details.
Roof Mounted 3/4G Antenna
The Roof Mounted 3G & 4G MIMO Antenna is the perfect solution for a tidy, fixed mobile broadband installation. Suitable for use with MiFi devices and 4G routers.
The Roof Mount is available in the following configurations:
- Flush Roof Mount – £99.99 Includes 2x 1m cable. Requires 18mm hole to be drilled through the roof.
- Surface Mount Antenna – £139.99 Includes 2x 3m cable and weatherproof cable entry gland.
- Customer Configuration – We can accommodate custom configurations and cable lengths, contact us for details.
If you are looking for the best possible 3G or 4G signal, then look no further. Our 3G & 4G MIMO antenna is a dual polarised antenna housing two powerful passive antenna elements given the required standard for 4G LTE MIMO (Multiple Input, Multiple Output). Not only does the antenna cover all the European 4G LTE wavebands, but is fully backwards compatible to 3G and 2G signals as and when they are available.
If the intended device has two external antenna connectors, such as our Huawei E5377, then you can utilise both connections. However you can still use this antenna with a 3G device – you will just connect either one of the two cables.
The Flush Mount antenna is intended to be positioned either directly above where you intend to mount your router internally or where the cable entry can be conveniently routed within the vehicle. When fitting in this manor, the unit would be mounted using adhesive sealant as the cables exit from the bottom of the unit. The supplied cable length is 2x 1m – but we can supply longer or shorter lengths depending on your requirement. Total heigh is 190mm.
The Surface Mount unit provides the flexibility of being able to mount the unit away from the cable entry point on the roof and run the cables above the roofline. In addition, the enclosure on which the antenna sits gives an additional 60mm of height which can be desirable on vehicles with a recessed / skirted roof – such as many of the Autotrail range. Total height is 250mm.
We recommend professional fitting for this unit, but installation could be carried out by a competent motorhome DIYer. We can however provide you with a cost for mobile fitting, please contact us for more details.
For MiFi devices which commonly have a TS9 style connector, you will require 1x or 2x TS9 connectors which are £1.49 each. Please see here: TS9 Connectors
